Last Updated: May 14, 2026
By accessing or using the Metal Creations Welding website, you agree to be bound by these Terms of Service and all applicable laws and regulations. If you do not agree with any of these terms, you are prohibited from using or accessing this site.
Permission is granted to temporarily download one copy of the materials (information or software) on Metal Creations Welding's website for personal, non-commercial transitory viewing only. This is the grant of a license, not a transfer of title, and under this license you may not:
This license shall automatically terminate if you violate any of these restrictions and may be terminated by Metal Creations Welding at any time.
Metal Creations Welding provides professional welding, fabrication, structural steel, and mechanical installation services. Any quotes or estimates provided through this website are preliminary and subject to change upon physical inspection of the project site or detailed review of blueprints and specifications. Final service agreements will be outlined in a separate written contract.
The materials on Metal Creations Welding's website are provided on an 'as is' basis. Metal Creations Welding makes no warranties, expressed or implied, and hereby disclaims and negates all other warranties including, without limitation, implied warranties or conditions of merchantability, fitness for a particular purpose, or non-infringement of intellectual property or other violation of rights.
In no event shall Metal Creations Welding or its suppliers be liable for any damages (including, without limitation, damages for loss of data or profit, or due to business interruption) arising out of the use or inability to use the materials on Metal Creations Welding's website, even if Metal Creations Welding or an authorized representative has been notified orally or in writing of the possibility of such damage.
The materials appearing on Metal Creations Welding's website could include technical, typographical, or photographic errors. Metal Creations Welding does not warrant that any of the materials on its website are accurate, complete, or current. We may make changes to the materials contained on its website at any time without notice.
These terms and conditions are governed by and construed in accordance with the laws of the United States, and you irrevocably submit to the exclusive jurisdiction of the courts in that State or location.
Metal Creations Welding delivers AWS D1.1 structural steel erection, ASME Section IX pipe welding, CNC custom metal fabrication, and 24/7 mobile rig field repairs across Lancaster, Palmdale, Mojave, and Santa Clarita. Led by Master Welder Joseph Martinez (20+ years experience), every weld is 100% CWI and Deputy Inspector ready. Call (661) 365-8462.
Calculate instant budget ranges for AWS D1.1 structural steel, mobile rig field dispatch, ASME pipe welding, and custom architectural fabrication in Lancaster, Palmdale, and Kern/LA County.
| Welding / Fabrication Division | Governing Code / Standard | Typical 2026 Antelope Valley Rate | Inspection & Turnaround Protocol |
|---|---|---|---|
| 24/7 Mobile Field Welding Rig | AWS D1.1 / Heavy Equipment Repair | $145 – $185 / hr (2–4 hr min) | Same-day dispatch across Lancaster, Palmdale & Mojave |
| Structural Steel Erection & Moment Welds | AWS D1.1 / AISC 341 Seismic Code | $3,200 – $5,400 / ton ($165–$215/hr) | 100% Ultrasonic (UT) & LA County Deputy Inspector Ready |
| High-Pressure Process & Steam Pipe | ASME Section IX / ASME B31.3 / API 1104 | $175 – $230 / hr (6G TIG Root + Stick Cap) | Hydrostatic, X-Ray (RT) & Shear-Wave NDT Compliant |
| Custom Architectural & Gate Fabrication | CBC Title 24 ADA / Ornamental Iron | $115 – $155 / hr ($95–$240 / linear ft) | CNC plasma cut, precision jigged, powder-coat ready |
| Hardfacing & Quarry/Plant Maintenance | AWS A5.13 Abrasion-Resistant Overlay | $155 – $195 / hr (On-site or Lancaster Shop) | Chromium-carbide build-up for buckets, chutes & hoppers |
Structural steel and exposed exterior metalwork across Lancaster, Palmdale, Quartz Hill, Rosamond, and Mojave face two punishing environmental stressors: proximity to the San Andreas Fault Zone (Seismic Design Category D/E) and extreme High Desert diurnal temperature swings ranging from 18°F winter nights to 114°F summer afternoons.
To prevent brittle fracture and thermal fatigue cracking, Metal Creations Welding strictly enforces preheat and interpass temperature controls per AWS D1.1 Table 5.8 using infrared pyrometers and temperature-indicating crayons. For demand-critical seismic moment connections on ASTM A992 wide-flange beams and ASTM A500 Grade C hollow structural sections (HSS), we utilize low-hydrogen charpy V-notch (CVN) toughness-rated electrodes (E7018-H4R and E71T-8) capable of absorbing cyclic seismic energy without root-toe cracking.
Failed structural or pipe inspections halt crane time, delay concrete pours, and cost general contractors thousands of dollars per day in liquidated damages. Every Complete Joint Penetration (CJP) groove weld and heavy fillet weld we execute is prepared with precision root openings, verified 30° to 45° bevel angles, and clean back-gouging to sound metal.
Before calling for a Los Angeles County Department of Public Works (Building & Safety) Special Deputy Welding Inspector or third-party Certified Welding Inspector (CWI), our supervisor performs a 5-point internal QC verification: root face land alignment, interpass slag removal, zero undercut exceeding 1/32 inch, convex bead profile verification via Bridge Cam gauge, and pre-UT visual sign-off.
Operating from our Lancaster fabrication facility at 43125 Cherbourg Ln, Lancaster, CA 93536 alongside fully outfitted mobile welding trucks, we bridge the gap between heavy shop fabrication and rapid field erection. Complex assemblies—such as structural embeds, stair stringers, industrial hoppers, and ornamental security gates—are fabricated in controlled shop jigs for sub-millimeter squareness.
Our mobile units carry 400+ amp diesel welder/generators, oxy-acetylene cutting torches, carbon-arc gouging rigs, magnetic base drills, and portable TIG/Stick/Flux-Core wire feeders—allowing immediate mobilization to aerospace facilities at Plant 42, solar fields in Rosamond, aggregate quarries in Littlerock, and commercial construction sites across Santa Clarita.
Every commercial, industrial, and aerospace-adjacent welding project across the High Desert must satisfy strict municipal and state engineering codes, including California Building Code (CBC) Chapter 17 Special Inspections, City of Lancaster Community Development structural standards, City of Palmdale Building & Safety submittal packages, and Kern County industrial mechanical permits.
We maintain full mill test report (MTR) heat-number traceability on all structural shapes (ASTM A992/A36), hollow structural tubing (ASTM A500 Grade B/C), pressure piping (ASTM A106 Grade B and A312 TP304/316L stainless), and AWS A5.1/A5.20 filler consumables. From pre-construction blueprint takeoffs to final signed deputy inspection reports, Metal Creations Welding delivers zero-compromise metallurgical integrity.